SSCC//SSEE SSeerriieess WWaasshh DDoowwnn SSccaalleess SC-30KAM / SC-60KAM / SC-150KAM / SC-60KAL / SC-150KAL SE-30K
8 5. SETTING UP 5-1. Attaching the display pole to the base SC-KAL / KAM series 1. Remove the weighing pan from the base. 2. Remove the 4 screws
9 SE-KAL / KAM series 1. Remove the weighing pan from the base. 2. Remove the 4 screws from the lower part of the display pole. 3. Insert the
10 5-2. Installing the scale 1. Select the place for installing the scale. Refer to “Precautions on installing the scale” below. 2. Adjust the level
11 5-3. Installing the batteries Prepare six, size D (R20P or LR20) batteries. The batteries are not included with the product. The scale can be used
12 6. BASIC OPERATION 6-1. Turning the power ON and OFF 1. Press the ON/OFF switch to turn the power ON. All the display symbols appear and th
13 6-3. Basic weighing operation 1. Press the ON/OFF switch to turn the power ON. 2. Select a weighing unit using the UNITS switch. 3. Wh
14 7. COUNTING MODE Determines a unit weight (the weight of one piece) from the known pieces of samples, and calculates how many pieces are on the we
15 8. COMPARATOR Compares the weight value with the upper and lower limit values and shows the results of the comparison by HI OK LO on
16 Entering the upper and lower limit values 1. Press the UNITS switch to select a weighing unit, ”kg”, ”lb” or ”oz” 2. Press and hold the UNITS
17 9. CALIBRATION Adjusts the scale for accurate weighing. Calibrate the scale in the following cases. When the scale is first installed. When t
© 2010 A&D Company, Limited. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, or transl
18 9-2. Calibration using a weight Prepare a weight, preferably a weight with the same value as the weighing capacity of the scale to be calibrated. N
19 9-3. Restoring to the factory setting values If the gravity acceleration value or calibration weight value is changed unintentionally, restore t
20 10. FUNCTIONS The scale has function settings to specify the scale performance. The parameters set in the function settings are maintained even if
21 10-2. Function list Item Parameter Description 0 Auto power-off disabled Auto power-off function poff 1 Auto power-off enabled Turns the
22 11. OPTIONS The following options are available for the SC/SE series: OP-02 (SCE-02) USB interface OP-03 (SCE-03) RS-232C serial interface
23 13. SPECIFICATIONS 13-1. Specifications Materials Weighing platform Weighing pan SC series: Stainless steel (SUS304) Stainless steel (S
24 13-2. External dimensions ●SC-30KAM / SC-60KAM / SC-150KAM ●SC-60KAL / SC-150KAL Unit: mm 6011716338038.11733
25 ●SE-30KAM / SE-60KAM / SE-150KAM ●SE-60KAL / SE-150KAL Unit: mm 60118300202380202722300220 406044012853
26 GRAVITY ACCELERATION MAP Values of gravity at various locations Amsterdam 9.813 m/s2 Manila 9.784 m/s2 Athens 9.807 m/s2 Melbourne 9.800
27 World map
1 CONTENTS 1. INTRODUCTION ... 2 2. FEATURES...
2 1. INTRODUCTION This manual describes how the SC/SE Series Wash Down Scales work and how to get the most out of them in terms of performance. Pleas
3 3. UNPACKING When unpacking, check whether all of the following items are included: ●Instruction manual ●SC-KAL / KAM series
4 4. DESCRIPTION OF EACH PART ●SC-KAL / KAM series Display Display poleWeighing pan Spirit level Option slot Ba
5 ●SE-KAL / KAM series Display Display pole Weighing pan Leveling foot Spirit level Option slot Battery cover Di
6 4-1. Display and symbols Display Symbols Symbol Description STABLE ○ Turns on when the weight value is stable. NET ◄ Turns
7 4-2. Switches Switch Description ON/OFF switch Turns the power ON or OFF. When turned ON, the scale will be automatically set to zero (power-o
Kommentare zu diesen Handbüchern